Pharmaceutical Processing Solutions
FDA-compliant pumps, sterilizing-grade filtration, lined valves, and high-purity water systems — sourced to documented CFR21.177, EC 1935/2004, USP Class VI, and cGMP credentials, not a "pharma-grade" label on a spec sheet.
Real Third-Party Standards, Not Market-List Mentions
Every product below is sourced from real manufacturer/distributor documentation, and each carries a specific, checkable compliance claim rather than a generic "pharmaceutical" keyword.
FTI Air — FDA-Compliant AODD Pumps
316L stainless steel wetted components, passivated to a RA 200μ-in / 5.1μm satin finish, tri-clamp connections, non-stalling air valve for delicate/shear-sensitive product handling. FTI Air names food, beverage, pharmaceutical, and cosmetic processing directly for this line.
Richter — MNK / RM Sealless Magnetic-Drive Pumps
Eddy-current-free CFRP/PTFE containment can, rare-earth SmCo/NdFeB magnets. Richter lists Pharma/Biopharma technologies as a named industry alongside its Food & Beverage CIP chemical list (caustic soda, phosphoric acid, nitric acid, sodium hypochlorite, peracetic acid).
Crane CPE/XOMOX — XLB Lined Ball Valve
Patented SX pressure-assisted stem seal moves with the floating ball stem for constant sealing with no fatigue. Body/ball material options include PFA, PFA-antistatic, or PVDF (fully non-metallic). Pharmaceutical is named alongside Chlor-Alkali, Industrial Inorganic Chemicals, and Nitrogen & Phosphatic Fertilizers.
AXEON — X1 / T-Series RO/UF/EDI Systems
AXEON's own technology-comparison table lists Pharmaceutical as the ideal use case for Double Pass RO (minimal chemical use), distinct from Industrial (Single Pass RO) and Laboratories (chemical-free EDI). EDI-Series eliminates acid/caustic regeneration chemicals entirely, >90% recovery, >2 MΩ-cm resistivity.
Strainrite — Pur-MAXX SG / Mem-Pleat SG Sterilizing-Grade Filters
0.2 micron PES sterilizing-grade membrane, bacterial retention validated to Brevundimonas diminuta, steam-durable, 100% integrity-tested by air diffusion. Manufactured under ISO 9001:2015 in validated ISO Class 7 clean rooms, with LAL endotoxin testing and bacterial challenge validation to ASTM F838 — available to LibertyCES customers through its distribution relationship with Allied Fluid Products.
Pexco — Altaflo® 480 UHP PFA Tubing
100% virgin high-molecular-weight, high-purity PFA resin — resistant even to fluorosurfactants known to attack lower PFA grades. Produced and packaged in a clean room, laser-marked for traceability. The 480 Dual Containment tube-in-tube construction makes a leak in the inner (product) tube visually detectable through the clear outer tube without disassembly.
These three appear in the vendor documentation with pharmaceutical named among a broader sector list, rather than a dedicated pharma product line — still real, but without the depth of the six above.
Pharma named among target chemical-batch-processing sectors for storage tanks.
Pharmaceutical manufacturing explicitly listed among flow-meter application sectors; Research Control® Valves separately named for "petrochemical processing to pharmaceutical manufacturing."
Class 1000 / ISO 6 cleanroom fabrication relevant to pharmaceutical cleanliness requirements.
Frequently Asked Questions
What compliance credentials matter most for pharmaceutical fluid-handling equipment?
Third-party credentials that name the specific standard, not just a market mention in a brochure — CFR21.177 and EC 1935/2004/EC (FDA/EU food-contact compliance for pumps), USP Class VI and USP 665 (biological reactivity for filter membranes), and cGMP manufacturing in a certified clean room (ISO Class 7). LibertyCES sources equipment where those credentials are documented by the vendor, not implied by a "pharma-grade" label.
Is a sterilizing-grade filter the same as any 0.2 micron filter?
No. Strainrite's Pur-MAXX SG / Mem-Pleat SG line is a 0.2 micron PES membrane specifically validated for bacterial retention against Brevundimonas diminuta — the industry-standard challenge organism for sterilizing-grade filtration — and every cartridge is individually integrity-tested. A general-purpose 0.2 micron filter without that bacterial-challenge validation is not automatically sterilizing-grade.
Why does AXEON recommend Double Pass RO specifically for pharmaceutical water, not Single Pass RO or EDI?
AXEON's own technology-comparison table positions Double Pass RO as the pharmaceutical fit because it uses minimal chemical input while still reaching the purity level pharma processes require — Single Pass RO is positioned for general industrial use, and chemical-free EDI is positioned for laboratory-scale ultrapure water rather than production-volume pharmaceutical systems.
Can pump and valve wetted materials be fully non-metallic for pharmaceutical service?
Yes — both FTI Air's FDA-compliant AODD pumps (polypropylene wetted option) and Crane CPE/XOMOX's XLB lined ball valve (PFA/PFA-antistatic/PVDF body and ball option) are available in fully non-metallic wetted configurations, in addition to their 316L stainless / metal-body-with-liner options.
Specifying equipment for aggressive chemistry?
Send LibertyCES the chemical, concentration, temperature, and flow — we'll confirm the material compatibility before you spec a model.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].