Sector Application
Metering/Dispensing System for Oil & Gas
Strong evidence
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →What LibertyCES's vendor documentation shows
Multipoint chemical injection explicitly for gas/oil wellheads and pipelines.
Products cited in this application
Harrier+ MPIKRAKN MPI
Real Specifications
| Multipoint injection capacity | Doses up to 8 injection points from a single pump and controller (Harrier+ MPI / KRAKN MPI) | graco-chemical-injection.md |
| Harrier+ Controller (DC, cellular) amperage | 25 A, Flow Control & Automation mode | graco-chemical-injection.md |
| Wolverine Drive Module classified-location approval | C1D1 and C1D2 approved for hazardous locations | graco-chemical-injection.md |
| Wolverine Fluid Module seal materials for aggressive chemicals | FFKM, FKM-ETP, HNBR seal options; stainless steel or ceramic plunger | graco-chemical-injection.md |
A single pump per wellhead is the default assumption, but Harrier+ MPI and KRAKN MPI let one controller and pump dose up to 8 injection points — a decision that changes total equipment footprint and site-visit count across a multi-well pad, not just the per-point injection rate. James Riggins' spec discipline means asking whether well count justifies multipoint before quoting single-point pumps by default.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
FAQ
Is Metering/Dispensing System used in Oil & Gas?
Multipoint chemical injection explicitly for gas/oil wellheads and pipelines. This is strong evidence.
What products are specified for Metering/Dispensing System in Oil & Gas?
Documented examples include Harrier+ MPI, KRAKN MPI — confirm current specifications with the manufacturer before final selection.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].